Data Cleaning

Data cleaning is an essential step between data collection and data analysis. Raw primary data is always imperfect and therefore needs to be prepared so it is easy to use in the analysis. This is the high level goal of Data Cleaning. In extremely rare cases the only preparation needed is to document the data set using for example labels. However, in the vast majority of cases there are many small things that needs to be addressed in the data set itself. This could both be addressing data points that are incorrect, or replace values that are not real data points, but codes explaining why there is no real data point.

Read First

• See this check list (not done yet) that can be used to make sure that common cleaning actions have been done when applicable.
• As a Research Assistant (RA) or Field Coordinator (FC) do not spend time trying to fix irregularities in the data at the expense of not having time to identifying as many irregularities as possible.
• The quality of the analysis will never be better than the quality of data cleaning.
• There is no such thing as an exhaustive list of what to do during data cleaning as each project will have individual cleaning needs, but this article provides a very good place to start.

The Goal of Cleaning

There are two main goals when cleaning the data set:

1. Cleaning individual data points that invalidate or incorrectly bias the analysis
2. Prepare a clean data set so that it is easy to use to other researcher. Both for researchers inside your team and outside your team.

Another overarching goal of the cleaning process is to understand the data and the data collection really well. Much of this understanding feeds directly into the two points above, but a really good data cleaning process should also result in documented lessons learned that can be used in future data collection. Both in later data collection rounds in the same project, but also in data collections in other similar projects.

Cleaning individual data points

In impact evaluations our analysis often come down to test for statistical differences in the mean between the control group and any of the treatment arms. We do so through advance regression analysis where we include control variables, fixed effects, different error estimators among many other tools, but in essence one can think of it as an advanced comparison of means. While this is far from a complete description of impact evaluation analysis it might give the person cleaning a data set for the first time a framework on what cleaning a data set should achieve.

It is difficult to have an intuition for the math behind a regression, but it easy to have an intuition for the math behind a mean. Anything that bias a mean will bias a regression, and while there are many more things that can bias a regression, this is a good place to start for anyone cleaning a data set for the first time. The researcher in charge of the analysis is trained in what else that needs to be done for the specific regression models used. The articles linked to below will go through specific examples, but it is probably obvious to most readers that outliers, typos in data, survey codes (often values like -999 or -888) etc. bias means, so it is never wring to start with those examples.

Prepare a clean data set

The second goal of the data cleaning is to document that data set so that variables, values and anythings else is as self-explanatory as possible. This will help other researchers that you grant access to this data set, but it will also help you and your research team when access the data set in the future. At the time of the data collection or at the time of the data cleaning, you know the data set much better than you will at any time in the future. Carefully documenting this knowledge so that it can be used at the time of analysis is often the difference between a good analysis and a great analysis.

Role Division during Data Cleaning

As a Research Assistant (RA) or Field Coordinator (FC), spend time identifying and documenting irregularities in the data. It is never bad to suggest corrections to irregularities, but a common mistake RAs or FCs do is that they spend too much time on trying to fix irregularities on the expense of having enough time to identify and document as many as possible.

Eventually the Principal Investigator (PI) and the RA or FC will have a common understanding on what corrections calls can made without involving the PI, but until then, it's recommended that the RA focus her/his time on identifying and documenting as many issues as possible rather than spending a lot of time on how to fix the issues. It is no problem to do both unless fixing happens to the cost of identifying as much as possible. One major reason is that different regression models might require different ways to correct issues and this is often a perspective only the PI have. In such cases much time might have been spent on coming up with a correction that is not valid given the regression model used in the analysis.

Import Data

The first step in cleaning the data is to import the data. If you work with secondary data (data prepared by someone else) then this step is often straightforward, but this is a step often underestimated when working with primary data. It is very important that any change, no matter how small, always is done in Stata (or in R or any other scripting language). Even if you know that there are incorrect submission in your raw data (duplicates, pilot data mixed with the main data etc.) those deletions should always be done so that it can be replicated by re-running code. Without this information the analysis might not longer be valid. See the article on raw data folders for more details.

Importing Primary Survey Data

All modern CAPI survey data collections tools provided methods for importing the raw data in a way that drastically reduces the amount of work that needs to be done when cleaning the data. These methods typically includes a Stata do-file that generates labels and much more from the questionnaire code and then applies that to the raw data as it is being imported. If you are working in SurveyCTO see this article on SurveyCTO's Stata Template.

Examples of Data Cleaning Actions

The material in this section has been generated having primary survey data in mind. Although, a lot of these practices are also applicable when cleaning other types of data sets.

Data Cleaning Check List. This is a check list that can be used to make sure that all common aspects of data cleaning has been covered. Note that this is not a exhaustive list. Such a list is impossible to create as the individual data sets and the analysis methods used on them all require different cleaning that in the details depends on the context of that data set.

Incorrect Data and Other Irregularities

There are countless of ways that there can be irregularities in a primary data set, so there is no way to do an exhaustive list of what should be done. This section gives a few examples

Outliers. There are many rules of thumb for how to define an outlier but there is no silver bullet. One rule of thumb is any data point that is three standard deviations away from the mean of the same data point for all observations. This may always be a starting point, but one needs to qualitatively consider if this is a correct approach. Observations with outliers should not be dropped, but in some cases the data point for that observation is replaced with a missing value. There are often better approaches. One common approach is to use winsorization, where any values bigger than the a percentile, often the 99th, is replaced with the value at that percentile. This way very large values are not biasing the mean. This also have a equality of impact aspect. For example, if all benefit of a project went to a single observation in the treatment group, then the mean would still be high but that is rarely a desired income in development. So winsorization penalizes inequitable distribution of the benefit of a project.

Illogical Values. This is to test that one data point is possible in relation to another value. For example, if a respondent is male, then the respondent cannot answer that he is pregnant. This simple case is something that can and should be programmed into the questionnaire so that it cannot happen. Although, no questionnaire ever can be pre-programmed to control for every such case.

Survey Codes and Missing Values

Almost all data collection done through surveys of any sort allow the respondent to answer something like "Do not know" or "Declined to answer" for individual questions. These answers are usually recorded using survey codes on the format -999, -88 or something similar. It is obvious that these numbers will bias means and regressions if they are left out. These values must be replaces with missing values in Stata.

Stata has several missing values. The most well know is the regular missing value represented by a single "." but we would lose the difference in meaning between "Do not know" and "Declined to answer" if both codes representing them would be replaced with the regular missing value. Stata offers a solution with its extended missing values. They are represented by ".a", ".b", ".c" etc. all the way to ".z". Stata handles these values the same as "." in commands that expect a numeric value, but they can be labeled differently and the original information is therefore not lost. Make sure that the same letter ".a", ".b" etc. is used to always represent only one thing across your project. The missing values should be assigned value labels so that See Stata Manual Missing Values for more details on missing values.

Missing values can be used for much more than just survey codes. Any value that we remove because we found out is incorrect should be replaced with a missing value. In a Master Data Set there should be no regular missing values. All missing values in a master data set should be explained why we do not have that information for that observation.

No Strings

All data should be stored in numeric format. There are multiple reasons for this, but the two most important is that it is much more efficiently stored and a lot Stata commands expect values to be stored numerically. Categorical string variables should be stored as numeric codes and have value labels assigned.

There are two exceptions where string variables are allowed. The two examples are listed below:

Numbers that cannot be stored correctly numerically. There are two cases of this exception. The first case is when a number is more than 15 digits long. This can happen when working with some national IDs. If a continuous variable has more than 15 digits, then it should be rounded and converted to a different scale, as a precision of 16 digits is not even possible in natural sciences. An ID can for obvious reasons not be rounded. The other case are numbers starting with a zero. This is sometimes the case in some national IDs and it is also sometimes the case with telephone numbers in some countries. Any leading zeros are removed by Stata and those cases therefore have to be stored as string.

Non-categorical text. Text answers that cannot be converted into categories needs to be stored as strings. One example is open ended questions. Open ended questions should in general be avoided, but sometimes the questionnaire ask the respondent to answer a question in his or her own words, and then that answer has to be stored as strings. Another example is if the respondent is asked to specify the answer after answering Other in a multiple choice question. A different example where string format is needed is some cases of proper names, for example the name of the respondent. Not all proper names should be stored as string as some can be made into categories. For example, if you collect data on respondents and multiple respondents live in the same villages, then the variable with the village names should be converted into a categorical numeric variables and have a value label assigned. See the section on value labels below.

Labels

There are several ways to add helpful descriptive text to a data set in Stata, but the two most common and important ways are variables labels and value labels.

Variable Labels All variables in a clean data set should have variable labels describing the variable. The label can be up to 80 characters long so there is a limitation to how much information can be included here. In addition to a brief explanation of the variable, it is usually good to include information such as unit or currency used in the variable and other things that are not possible to read from the values themselves.

Value Labels Categorical variables should always be stored numerically and have a value labels that describe what the numeric code represent. For example, a yes and no questions should be stored as 0 and 1 and where the label No is put to data cells with 0, and the label Yes to all data cells with 1. This should be applied to all multiple choice variables.

There are tools in Stata to convert categorical string variables to a categorical numeric variable where the strings are automatically applied as value labels. The most common tool is the command encode. However, if you use encode you should always use the two options label() and noextend. Without these two options Stata assigns code to each string value in alphabetic order. There is no guarantee that the alphabetic order is change when observations are added or removed, or if someone else is making changes earlier in the code. label() forces you to manually create the label before using encode (this requires some manual work but it is worth it). noextend throws an error if there is a value in the data that does not exists in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a type or similar that is the reason that String value was not assigned a value label.