Iecodebook

iecompdup is the final command in the Stata package created by DIME Analytics, iefieldkit. After data collection is complete, iecodebook allows the research team to automatically perform the repetitive steps involved in cleaning data before further analysis. As the name suggests, the iecodebook command is structured around Excel-based codebooks, which allow researchers to perform and document data cleaning tasks in Excel itself, instead of using do-files.

Read First

• Stata coding practices.
• iefieldkit.
• The sub-commands of iecodebook allow the research team to rapidly clean, harmonize, and document datasets using codebooks.
• Codebooks allow researchers to document the cleaned data in a format that is both human and machine-readable.
• To install iecodebook, type ssc install iecodebook in Stata.
• To install all the commands in the iefieldkit package, type ssc install iefieldkit in Stata.
• For instructions and available options, type help iecodebook.

Overview

As its name suggests, the iecodebook command creates Excel-based codebooks. The research team can fill these codebooks with data cleaning instructions for Stata. In this way, iecodebook creates a metadata record which is easier to write than a long sequence of data cleaning commands in a do-file. These codebooks in Excel are also easier to read and understand, even if someone does not have knowledge of Stata. There are four subcommands in iecodebook to support its functions:

• iecodebook apply: Reads an Excel codebook where the user renames, recodes, and/or labels a large number of variables, and applies these changes to the current dataset.

• iecodebook append: Allows two or more datasets to have the same variable names, labels, and value labels. That is, it harmonizes two or more datasets, and appends them.

• iecodebook export: Creates an Excel codebook that describes the current dataset. It can also produce an exportable version of the dataset which only contains the variables used in a particular do-file.

• iecodebook template: Creates an Excel template that describes the current or targeted dataset(s), and prepares the codebook for the other iecodebook subcommands.

Apply

The most common data cleaning tasks include renaming variables, applying variable and value labels, and recoding values. The iecodebook apply subcommand allows the research team to perform all of these tasks without writing separate lines of code for each task in Stata. The following steps list how the iecodebook apply works.

1. Create template: iecodebook first converts the dataset into a template in Excel using iecodebook template. In this template, each column describes different aspects of a single variable, including name, label, type, and so on.
2. Complete template: After this, you can simply fill out the template, which creates the codebook. The codebook lists all the data cleaning tasks that you wish to perform on the dataset.
3. Apply changes: The iecodebook apply subcommand then reads these commands, and executes them all with just one line of Stata code. The resulting output is a cleaned dataset, along with an easy-to-read record of the cleaning commands you applied.

Syntax

The following line of code creates an apply template with the relevant dataset. The template is named filename.xlsx in this case.

iecodebook template using "filename.xlsx"

The following line of code applies the changes to the dataset. It saves the codebook with the same name, that is, filename.xlsx.

iecodebook apply using "filename.xlsx"
   , [drop] [missingvalues(# "label" [# "label" ...])]

Implementation

The following steps use an example to explain how iecodebook apply works in practice .

Step 1: Load the dataset

First, load the dataset which you wish to clean. In this case, the dataset is named "auto.dta".

sysuse auto.dta , clear

Step 2: Create template

Next, run the following code to create the template codebook, which is named "cleaning.xlsx" in this case.

iecodebook template using "cleaning.xlsx"

This produces the following template codebook reflecting the current state of the data:

File:Apply-template.png

Data cleaning codebook template

Step 3: Complete template

To apply changes to the data, complete the "name" and "label" columns to prepare rename and label variable commands for the current dataset, respectively. To apply value labels, enter a label name in the "choices" column and create the corresponding value label in the choices sheet (every template includes a demo yesno label as a guide). To recode data values, use the usual syntax (rule) [(rule) ...] in the "recode:current" column. You cannot change data types with this command; these are provided for reference only. For example, you might write the following to make some adjustments to the foreign variable:

Step 4: Apply cleaning commands

To apply the changes, you would then run the following command:

   // Apply cleaning commands to open dataset
   iecodebook apply using "codebook.xlsx"

Note that the correct command is created by replacing template with apply. By default, all variables with no adjustments will be left as-is. However, this is not required: the drop option orders all variables that have no final variable name in the name column to be dropped from the dataset. Alternatively, the user can place a single period . in the name column to drop variables one by one. The missingvalues() option allows global missing-value codes to be propagated to all value labels. Note also that you will have to manually recreate all value label lists in the choices sheet, but that the data labels from your original dataset is available for copy-paste from the choices_current sheet.

Append

A common downstream task in data collection is to combine two or more sequential rounds of surveys; or, similarly, to combine similar survey instruments conducted in different settings. This is always harder than it first sounds. Inevitably, updates and/or localization have been made to at least one of the datsets, such that a simple append command will not produce the desired data structure. Most often, these changes cause desynchronisation of:

• Variable names
• Variable labels (including translation)
• Value labels
• Data types

The iecodebook append subcommand offers a rapid workflow for documenting and resolving these differences across multiple datasets. The general syntax of the templating command is:

 iecodebook template
   "/path/to/survey1.dta" "/path/to/survey2.dta" [...]
   using "/path/to/codebook.xlsx"
   , surveys(Survey1Name Survey2Name ...)
   [match] [generate(varname)]

As in iecodebook apply, the correct executing command is formed by replacing template with append. The general syntax of the iecodebook append command is therefore:

 iecodebook append
   "/path/to/survey1.dta" "/path/to/survey2.dta" ...
   using "/path/to/codebook.xlsx"
   , surveys(Survey1Name Survey2Name ...) 
     [keepall] [generate(varname)]
     [missingvalues(# "label" [# "label" ...])]

The surveys() option is required in both steps, and must match between them. As a list of single words, the users should specifiy the names of the surveys (which the command will look for in the codebook headers). The command will also create a survey variable in the resulting dataset, labelled with these names -- -- to change the name of that variable, use the generate() option in both commands. To demonstrate the usage, we will create two datasets that have similar data but with different structures, then combine them using a codebook. Run the following:

   // Create demonstration datasets
   sysuse auto.dta , clear
   save data1.dta , replace
   rename (price mpg)(cost car_mpg)
       recode foreign (0=1 "Domestic")(1=0 "Foreign") , gen(origin)
       drop foreign
   save data2.dta , replace

Harmonize

   // Create harmonization codebook template
   iecodebook template         ///
     "data1.dta" "data2.dta"   ///
     using "codebook.xlsx"     ///
     , surveys(First Second)

This should produce the following harmonization codebook template:

To resolve the differences, the completed codebook would be modified to look as follows. Note the key functionality of harmonization -- variables from different datasets are placed by the user into the same row, and iecodebook append understands this to mean that they should have the same final instructions applied to them so that they append properly (except, of course, recode; which is why there is one recode: column for each survey as well as choices_ sheets for reference). Specifying the match option does this as best as possible by automatically aligning variables that have the same name in the template.

There are two important differences from the apply syntax. First, the drop option is the default: that is, if there is no name harmonization specified, that is, if there is no value in the first four columns (name, label, type, choices), variables are dropped. (The keepall option may be specified to override this behavior, but the user should check the results carefully.) Again, note that you will have to manually recreate the value label lists in the choices sheet, but that the data labels from your original datasets are available for copy-paste from respective choices_ sheets.

To execute the command, run:

   // Harmonize and append the datasets
   iecodebook append           ///
     "data1.dta" "data2.dta"   ///
     using "codebook.xlsx"     ///
     , surveys(First Second)

The combined dataset will yield the following crosstabs, and a codebook titled codebook\_appended.xlsx will be created in the same location as the append codebook documenting the final state of the dataset for quick reference.

   . ta survey foreign

         Data |        Foreign
       Source |  Domestic    Foreign |     Total
   -----------+----------------------+----------
        First |        52         22 |        74
       Second |        52         22 |        74
   -----------+----------------------+----------
        Total |       104         44 |       148

Export

The iecodebook export command provides a simple utility for documenting the current state of a dataset, and for preparing a trimmed "release" version of a dataset. The syntax is:

 iecodebook export [if] [in] using "/path/to/codebook.xlsx"
   , [replace] [trim("/path/to/dofile1.do" ["/path/to/dofile2.do"] ...)]

The base command will simply produce a record of the dataset's contents at the specified location. If the trim() option is specified, iecodebook export will read the contents of the specified dofiles; drop any variables that do not match the contents; restrict the dataset according to if and in as specified; and save the results in the same location as the codebook as a .dta file with the same name. (Note that this is a new functionality and is imperfectly implemented: trim() will not, for example, correctly parse macros. Therefore, please check that your results run and reproduce correctly after using this option.)

Additional Resources

• DIME Analytics' guidelines on iecodebook