Difference between revisions of "DataWork Folder"

Jump to: navigation, search
Line 23: Line 23:


=== EncryptedData ===
=== EncryptedData ===
This folder create a branch in the ''DataWork'' folder that can easily be encrypted using an encryption software like boxcryptor. Anything identifying or in any otherway sensitive data, should be saved in this folder. Note that while iefolder creates a folder called ''Encrypted Data'' when you set up the ''DataWork'' in the first place, iefolder does not encrypt it. When creating a new survey round or new unit of observation (Master Data) with iefolder, it creates folders for each of them in the ''EncryptedData'' folder where raw data, high frequency checks and other items likely to have identifying or other sensitive information should be stored.
This folder create a branch in the ''DataWork'' folder that can easily be encrypted using an encryption software like boxcryptor. Anything identifying or in any otherway sensitive data, should be saved in this folder. Note that while [[iefolder]] helps you create a folder called ''Encrypted Data'' when you set up the ''DataWork'' in the first place, iefolder does not encrypt it. Later, when creating either a new survey round or new unit of observation (Master Data) with iefolder, the command creates folders for each survey round or unit of observation in the ''EncryptedData'' folder where raw data, high frequency checks and other items likely to have identifying or other sensitive information should be stored.


=== MasterData ===
=== MasterData ===

Revision as of 10:22, 30 November 2017

A well-organized data folder reduces the risk for many types of errors. At DIME, we have a standardized folder structure. Some projects have special folder requirements and only use the folder set up as a starting point, but many resources created by DIME are easier to take advantage of if this template is followed. It takes a lot of work to reorganize a project folder, so we strongly recommend that projects follow our standard from the beginning. A poorly set up folder will have inefficiency consequences and increases the risk of errors over several years.

We have published a command called iefolder in our package ietoolkit that we have published on SSC. iefolder sets up the recommended folder structure described in this article for you.

Read First

  • Do not set up these folders manually. iefolder is a Stata command that easily sets up and updates this folder structure for you.

Where should the DataWork folder be created?

Image 1. Example of where the DataWork folder is location in relation to Box/DropBox folders. (Click to enlarge.)

Most project folders are shared across the project teams using DropBox, Box, or something similar. In this folder, there are different folders for project budget, government communications, etc. DIME's folder structure template assumes 'the DataWork' folder to be one of them.

See Image 1 on the right with an example of a Box/DropBox folder with three project folders. All three projects have a similar sub-folder structure, but in the image only one of the projects sub-folder structure is shown. The DataWork folder is highlighted with a red circle.

Anything related to the data of a project has a designated location inside this folder. This includes data-files, sampling and treatment assignment code, questionnaires, data collection documentation, analysis code, analysis output etc. This includes data collected by ourselves, both regular survey rounds and monitor data, and also includes other sources of data such as admin data or secondary data.

Inside the DataWork folder

File:FolderDataWork.png
Image 2. Example of a DataWork folder. (Click to enlarge.)

Inside the DataWork folder there should only be folders and a master do-file or perhaps also other documentation that helps navigating those folders. The folder structure in the image is a template that we recommend for all projects, although we understand that some projects have special requirements and therefore will only use this as starting point. Everything described here is easily set up using the Stata command iefolder.

The DataWork folder should have a folder we call EncryptedData where files with sensitive data should be put and can be encrypted, a folder we call MasterData where we keep documentation and data sets that track the observations we are collecting data on, a project master do-file, and survey round folders where the data for each survey round is stored. The survey round folders can be organized into subfolders for complex projects with a large number of surveys. All of these items are explained below.

EncryptedData

This folder create a branch in the DataWork folder that can easily be encrypted using an encryption software like boxcryptor. Anything identifying or in any otherway sensitive data, should be saved in this folder. Note that while iefolder helps you create a folder called Encrypted Data when you set up the DataWork in the first place, iefolder does not encrypt it. Later, when creating either a new survey round or new unit of observation (Master Data) with iefolder, the command creates folders for each survey round or unit of observation in the EncryptedData folder where raw data, high frequency checks and other items likely to have identifying or other sensitive information should be stored.

MasterData

After the project folder is set up initially, there are two types of folder that should be created before data is added to the folder. One type is Survey Rounds and are folders where data in relation to a specific data collection is stored. This is exaplained in more detail below, but a survey round is typically baseline, endline etc. The other type that will be discussed here it the Master Data Sets. A project need one master data set for each unit of observation used in the project, for example, households, students, teachers, firms, etc.

In a master data set we store information about all the observations we collect data on. This should be more than just the sample that we end up using in our data collections, as we are sometimes needed to be able to identify observations that are not in our sample, not just the observations that are. In these master data sets we can track any time-invarient information that could be needed across our project, such as observation in sample, treatment status, monitoring information, identifying information etc.

When adding a round or another unit of obsrevation, folders are created both inside the encrypted branch of the DataWork folder and outside it. In the encrypted branch we can store any information, but the version of the data set in the MasterData folder outside the encrypted branch should have all identifying information removed. The reason we have an decrypted version as well is that it is quicker to access and it can often be shared outside the research team.

Sampling and Treatment Assignment

The master data sets folder should also include all activities that is best practice to do directly on the main listing of all observations. The two best examples of such tasks in the context of Impact Evaluation is sampling and treatment assignment. This should never be done directly on census data or baseline data etc. When we have census data we use that data for sampling, but the point here is that we always want to match the census data to the master data and check that it makes sense in relation to whatever data we have there already. After that quality control step, we can sample directly from the master data set knowing that the sample we randomize will make sense in relation to other data sources.

Project Master Do-File

The DataWork folder should also have a project master do-file. A master do-file is a do-file that runs other do-files needed to everything from cleaning to analysis and it also set same settings for all users making sure that everyone gets the same result. A very useful side effect of a master do-file running all other do-files is that it works as a map to where all files are located in the DataWork folder. If you are new to a project folder, always start by finding the master do-file.

The project master do-file sits in the DataWork folder, but each round folder has a round master do-file as well. The round master do-file has the same purpose but only for the files and folders associated with that round. A master do-file is also used to set up dynamic file paths so that multiple users can work from the same project folder shared over, for example, DropBox or Box.

Survey Round


Image 3. Example of a Survey Round folder. (Click to enlarge.)

Baselines, Follow Up Surveys, Midlines, Endlines are all examples of a Survey Round. This is the data that we in Impact Evaluations will test if it changes over time and if that change is significantly different between treatment and control. In contrast, the information in master data sets, like the ID assigned by us, whether you were sampled for baseline, whether you are selected for treatment or control are all examples of information that is time invariant and will remain the same over the course of the project. Monitor data might change over time, for example in a impact evaluation running over many years one observation might not take up the treatment the first year but might do so the next year.

Each survey round should have it's own sub-folder inside the DataWork folder. For example - Inside the main data folder, you can have sub-folders like baseline, follow up 1, follow up 2, midline, endline, etc. See image 3 for an example. When you create a survey round folder using the command iefolder all sub-folders and sub-sub-folders described below will be created for you and all your master dofiles will be updated or created accordingly.

Inside each Survey Round folder you will find a master do file for that survey round as well as the following folders DataSets, Dofiles, Outputs, Documentation, and Questionnaire.

See DataWork Survey Round for more details if any of the bullet points is not perfectly clear to you.

Multiple Units of Observation

If you have multiple units of observation in a survey round for example farmers and villages, or students, teachers and schools, then you should create a survey round folder for each unit of observations. For example, you would end up with one survey round folder called baseline_students, one called baseline_teachers and one called baseline_schools.

Sampling and Treatment Assignment

Sampling and Treatment Assignment folders have intentionally been left out from the survey round folders. Separate folders for those tasks has been created in the master data set folder as we strongly recommend that sampling and treatment assignment is done directly from the master data sets.

MonitorData

Monitor data is data collected to understand the implementation of the assigned treatment in the field. Typical survey round data helps us understand any changes in outcome variables that the treatment and other factors have caused during the duration of our project, and monitor data helps us the treatment its self. For example, who actually received the treatment and was the treatment carried out according to the research design. Monitor data helps us understand what is usually referred to as internal validity. For the purpose of data folder organisation you can treat them the same way.

Since the purpose of survey round data and monitor data is slightly different, we recommend you keep the different types of data in different folders. Sometimes survey round data and monitor data are collected in the same data collection, and then it is not feasible to keep them separated. For example, if an enumerator visited a training for the respondents in the treatment group at the time of a midline survey and recorded attendance then that data should be kept separate from the survey round data. But if the respondents were asked in the a survey round survey if the respondent attended the training, then it not always worth the effort to go through the work of separating the monitor data from the survey data. If they are collected at the same time but in separate data collections, then the folders should be kept separately.

Admin Data

Admin data is data that have been collected for other purposes but has been shared with the research team. It can be used both in the way survey round data is used in the analysis or as the way monitoring data can be used. For example, if the outcome variable the research team is trying to evaluate is measured in some other way then that is admin data we can use to measure change in outcome data. One example would be standardized test scores. We can often use the internal data our implementation partner uses as monitor data. That is one example when admin data is monitoring data. There are also many cases when the same admin data set is used for both purposes.

Create a new survey round folder for admin data sets.

MasterData


Image 4. Example of a Master Data Set folder. (Click to enlarge.)

Master Data Sets is the best tool to avoid errors related to using multiple sources of data for one project. All impact evaluations use multiple sources of data. Multiple survey rounds are in this sense different sources of data. A census made before a data collection is a different source of data. Monitoring data and admin data combined with any other data are other examples. Master data sets should therefore be used in all projects and iefolder therefore creates the main folders for Master Data Sets by default when the DataWork folder is created.

There are two locations where Master Data Sets are stored. One location inside the encrypted brach of the DataWork folder. Here you can save a Master Data Set with identifying information. In not other data set than here will we have both the ID variable as well as identifying information. This is the key between the IDs that we use and the identity of the respondents. If this data set is shared publicly, then the identity of all of our respondents are revealed.

The Master Data Sets is a listing of all observations we have ever encountered in relation to this project (not just the observations we sampled). In this listing, we keep identifying information and the unique ID that we have assigned. We also keep time invariant information required at multiple stages of the research work. Examples are dummy for being sampled in baseline, categorical variable for treatment arm, dummy for correctly receiving the assign treatment arm etc. See the Master Data Sets article for more details.

Master Data Sets is more than just a folder. It is a methodology for internal research validity in a multi data set environment. See the Master Data Sets article for information both on how the master data set folder should be organized but also how it should be used for research quality purposes. One important motto is that if you do any merge (string or numeric) where the variable you merge on is not a proper ID variable, then one of the data set you are merging should always be a master data set.

Back to Parent

This article is part of the topic Data Management