Difference between revisions of "Data Cleaning"

Jump to: navigation, search
Line 88: Line 88:
Always store categorical variables numerically and use value labels to indicate what the numeric code represents. For example, yes and no questions should be stored as 0 and 1 with the value labels ''No'' for data cells with 0, and the label ''Yes'' for all data cells with 1. This same concept applies to multiple choice variables.
Always store categorical variables numerically and use value labels to indicate what the numeric code represents. For example, yes and no questions should be stored as 0 and 1 with the value labels ''No'' for data cells with 0, and the label ''Yes'' for all data cells with 1. This same concept applies to multiple choice variables.


There are tools in Stata to convert categorical string variables to a categorical numeric variable where the strings are automatically applied as value labels. The most common tool is the command <code>encode</code>. However, if you use <code>encode</code>, you should always use the two options <code>label()</code> and <code>noextend</code>.  
There are tools in Stata that convert categorical string variables into categorical numeric variables and automatically apply the string as value labels. The most common tool is <code>encode</code>. However, if you use <code>encode</code>, always use the two options <code>label()</code> and <code>noextend</code>.  
*<code>label()</code> forces you to manually create the label before using encode (this requires some manual work but it is worth it).  
*<code>label()</code> forces you to manually create the label before using encode. This requires some manual work but it is worth it.
*<code>noextend</code> throws an error if there is a value in the data that does not exist in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a typo or similar that is the reason why that string value was not assigned a value label.
*<code>noextend</code> throws an error if there is a value in the data that does not exist in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a typo.
Without these two options, Stata assigns a code to each string value in alphabetic order. There is no guarantee that the alphabetic order is changed when observations are added or removed, or if someone else makes changes earlier in the code.  
Without these two options, Stata assigns a code to each string value in alphabetic order. There is no guarantee that the alphabetic order is changed when observations are added or removed, or if someone else makes changes earlier in the code.


== Additional Resources ==
== Additional Resources ==

Revision as of 21:27, 5 June 2019

Data cleaning is an essential step between data collection and data analysis. Raw primary data is always imperfect and needs to be prepared for a high quality analysis and overall replicability. In extremely rare cases, the only preparation needed is dataset documentation. However, in the vast majority of cases, data cleaning requires significant energy and attention, typically on the part of the Research Assistant (RA). This page outlines the goals of data cleaning, recommends role division, outlines common issues encountered, and presents approaches to resolve them.

Read First

  • The goal of data cleaning is to clean individual data points and to make the dataset easily usable and understandable for the research team and external users.
  • The quality of the analysis will never be better than the quality of data cleaning.
  • There is no such thing as an exhaustive list of what to do during data cleaning: each project will have individual cleaning needs. This article provides a very good place to start.
  • See this data cleaning checklist to ensure that common cleaning actions have been completed.

The Goals of Cleaning

The data cleaning process seeks to fulfill two goals: (1) to clean individual data points that invalidate or bias the analysis, and (2) to make the dataset easily usable and understandable for researchers both within and outside of the research team. A really good data cleaning process should also result in documented insights about the data and data collection to inform future data collection – either for a different round of the same project or for other future projects.

Picture2.png

Cleaning Individual Data Points

RCT analysis typically rely to regressions to test for statistical differences between the means of the control and treatment groups. In essence, one can think of regression analysis as an advanced comparison of means. While this is, of course, an extreme simplification, it may provide a useful framework and perspective to an RA cleaning a dataset for the first time. While it may be difficult to have an intuition for the math behind a regression, it easy to have an intuition for the math behind a mean.

Anything that biases a mean will bias a regression: outliers, missing values, typos, erroneous survey codes, illogical values, duplicates, etc. While many more things can also bias a regression, this conceptualization provides a good starting place for anyone cleaning a dataset for the first time. The researcher leading the analysis is trained in the other granular details and knowledge necessary for the specific regression models.

Making the Dataset Usable and Understandable

The second goal of the data cleaning is to code and document the dataset to make it as self-explanatory as possible. At the time of the data collection and data cleaning, you know the dataset much better than you will at any time in the future. Carefully documenting this knowledge often makes the difference between a good analysis and a great analysis. A usable and understandable dataset will not only help you and your research team in the future, but also other researchers who use the dataset down the road.

Role Division during Data Cleaning

Research Assistants (RAs) and Field Coordinators (FCs) should prioritize their time on identifying and documenting irregularities in the data rather than correcting them. It is never bad to suggest corrections to irregularities. However, many RAs or FCs spend too much time trying to fix irregularities and, in turn, do not have enough time to identify and document them completely. This is often inefficient, as different regression models and/or PI preferences may require different corrections. In such cases, time-consuming corrections may not be valid given the regression model used in the analysis.

Eventually, the Principal Investigator (PI) and the RA or FC will have a common understanding on what correction decisions to make without involving the PI. Until then, the RA should focus her/his time on identifying and documenting as many issues as possible rather than fixing them. Again, it is no problem to do both so long as the time spent fixing doesn't prevent the RA from identifying and documenting as many issues as possible.

Importing Data

The first step in cleaning the data is to import the data. When working with secondary data (i.e. administrative data), this step is often straightforward. However, with primary data, this step is often underestimated.

All modern CAPI survey data collection tools provide methods for importing the raw data in a way that drastically reduces cleaning work. These methods typically include a Stata do-file that generates labels and other features from the questionnaire code and then applies them to the raw data during the import.

Ensure that any change, no matter how small, is always be made in Stata, R, or the scripting language of use. When dealing with incorrect submissions in raw data (i.e. duplicates, pilot data mixed with the main data, etc.), handle these issues and deletions in such a way that they can be replicated by re-running code: without this information, the analysis may no longer be valid. See the article on raw data folders for more details.

Data Issues and Approaches

A countless list of irregularities may appear in a primary dataset, requiring a multitude of data cleaning actions. This section does not provide an exhaustive list but rather a few examples of irregularities and approaches.

ID Variables

Observations in the dataset should be uniquely and fully identifiable by a single ID variable. Often, raw primary data includes duplicate entries. Carefully document these cases. To ensure accuracy, only correct them after discussing with the Field Coordinator and field team what caused them. ieduplicates, a command in ietoolkit identifies duplicated entries, while iecompdup helps to correct them. Once duplicates are corrected, the observations can be linked to the master dataset.

Outliers

While there are many rules of thumb for how to define an outlier, there is no silver bullet. Some consider an outlier to be any data point that is three standard deviations away from the mean of the same data point for all observations. This may be a starting point, but one needs to qualitatively consider if this is a correct approach. Approaches to outliers include, but are not limited to:

  1. Replacing the outlier values with a missing value.
  2. Winsorization, or replacing any values bigger than a certain percentile, often the 99th, with the value at that percentile. This prevents very large values from biasing the mean. It also maintains an equality of impact aspect. For example, if all project benefits go to a single observation in the treatment group, then the mean would still be high, but that is rarely a desired outcome in development. Winsorization thus penalizes inequitable distribution of the benefits of a project.

Illogical Values

In theory, good questionnaire design should include logic checks that prevent illogical values. For example, if a respondent is male, then the questionnaire should not allow the respondent to answer that he is pregnant. However, no questionnaire ever can be pre-programmed to control for every such case. Discuss with the research best approaches to illogical values found in the raw dataset.

Typos

If it is obvious beyond any doubt that the response is incorrect due to a simple typo, then correct the typo. Make sure to document the change in a replicable way.

Survey Codes and Missing Values

Almost all data collection done through surveys of any sort allows respondents to answer something like "Do not know" or "Decline to answer" for individual questions. These answers are usually recorded using survey codes in the format -999, -88 or something similar. If left as such, these numbers will bias means and regressions. Accordingly, they must be replaced with missing values in Stata.

Stata has several missing values. The most well-known is the regular missing value represented by a single "." but Stata also offers extended missing values: ".a", ".b", ".c" etc. all the way to ".z". Stata handles these values the same as "." in commands that expect a numeric value. Conveniently, these extended missing values accept value labels that allow you to distinguish between, for example, "Do not know" and "Decline to answer." You might label ".d", for example, as "Decline to answer", and ".k" as "Do not know." Make sure to always assign value labels to extended missing values so that they can be precisely interpreted. Finally, make sure to consistently use the same letter ".a", ".b" etc. to represent only one response across your project. See Stata Manual Missing Values for more details on missing values.

Missing values can be used for much more than just survey codes. Any value that we remove because it is incorrect should be replaced with a missing value. In a master dataset, there should be no regular missing values. All missing values in a master dataset should contain an explanation of why there is no information for that value.

Strings

All data should be stored in numeric format because (1) Stata stores numbers more efficiently than strings and (2) many Stata commands expect values to be stored numerically. During the data cleaning process, make sure to clean categorical string variables and convert them into numeric codes. Then assign value labels for clarity. The commands destring and/or encode may be useful during this process.

There are two exceptions in which string variables are acceptable:

  1. If the number cannot be stored correctly numerically. This may occur in two scenarios:
    1. If the number is more than 15 digits long. For obvious reasons, an ID cannot be rounded and may remain a string. However, if a continuous variable has more than 15 digits, round it and convert it to a different scale. After all, a precision of 16 digits is not even possible in natural sciences.
    2. If the number begins with 0, as is sometimes the case for national IDs and telephone numbers. In this case, continue storing the number as a string, as Stata would remove any leading zeros when destringing.
  2. Non-categorical text. It is acceptable to store text answers that cannot be converted into categories as strings. A few examples follow:
    1. Open-ended questions: open-ended questions should, in general, be avoided, but sometimes the questionnaire asks the respondent to answer a question in his or her own words.
    2. Other specifications: the respondent is asked to specify the answer after answering other in a multiple choice question.
    3. Proper names: names of people, etc. Note that not all proper names should be stored as string as some can be made into categories. For example, if you collect data on respondents and multiple respondents live in the same villages, then convert the variable with the village names into a categorical numeric variable and assign a value label.

Labels

There are several ways to add helpful descriptive text to a data set in Stata, but the two most common and important ways are variables labels and value labels.

Variable Labels

All variables in a clean data set should have variable labels that explain what the variable represents. In addition to a brief explanation of the variable and perhaps the question number from which it comes, you may also decide to include information such as the unit or currency used in the variable. The label can be up to 80 characters long.

Value Labels

Always store categorical variables numerically and use value labels to indicate what the numeric code represents. For example, yes and no questions should be stored as 0 and 1 with the value labels No for data cells with 0, and the label Yes for all data cells with 1. This same concept applies to multiple choice variables.

There are tools in Stata that convert categorical string variables into categorical numeric variables and automatically apply the string as value labels. The most common tool is encode. However, if you use encode, always use the two options label() and noextend.

  • label() forces you to manually create the label before using encode. This requires some manual work but it is worth it.
  • noextend throws an error if there is a value in the data that does not exist in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a typo.

Without these two options, Stata assigns a code to each string value in alphabetic order. There is no guarantee that the alphabetic order is changed when observations are added or removed, or if someone else makes changes earlier in the code.

Additional Resources

  • DIME Analytics’ Data Management and Cleaning
  • The Stata Cheat Sheets on Data processing and Data Transformation are helpful reminder of relevant stata code
  • The Quartz guide to bad data on Github has lots of helpful tips for dealing with the kind of data problems that often come up in real world settings.
  • See this data cleaning checklist to ensure that common cleaning actions have been completed. Note that this is not an exhaustive list. Such a list is impossible to create as the individual datasets and the analysis require different cleaning depending on context.