Difference between revisions of "Stata Coding Practices"

Jump to: navigation, search
Line 12: Line 12:
* '''During data collection.''' The <code>[[ieduplicates]]</code> and <code>[[Iecompdup|iecompdup]]</code> commands allow the [[Impact Evaluation Team|research team]] to '''detect''' (identify) and '''resolve''' (deal with) duplicate entries in the data set. These commands were previously a part of the <code>[[Stata Coding Practices#ietoolkit|ietoolkit]]</code> package, but are now part of the <code>[[iefieldkit]]</code> package.
* '''During data collection.''' The <code>[[ieduplicates]]</code> and <code>[[Iecompdup|iecompdup]]</code> commands allow the [[Impact Evaluation Team|research team]] to '''detect''' (identify) and '''resolve''' (deal with) duplicate entries in the data set. These commands were previously a part of the <code>[[Stata Coding Practices#ietoolkit|ietoolkit]]</code> package, but are now part of the <code>[[iefieldkit]]</code> package.
* '''After data collection.''' The <code>[[iecodebook]]</code> command provides a method for rapidly [[Data Cleaning|cleaning]], [[iecodebook#Harmonize|harmonizing]], and [[Data Documentation|documenting]] data sets.  
* '''After data collection.''' The <code>[[iecodebook]]</code> command provides a method for rapidly [[Data Cleaning|cleaning]], [[iecodebook#Harmonize|harmonizing]], and [[Data Documentation|documenting]] data sets.  
 
To install the <code>[[iefieldkit]]</code> package, type <code>ssc install iefieldkit</code> in your Stata command window. Note that some features of this package might require '''meta data''' (information) that is specific to '''SurveyCTO''', but users can still test them in other cases.
To install the <code>[[iefieldkit]]</code> package, type <code>ssc install iefieldkit</code> in your Stata command window. Note that some features of the package might require meta data specific to SurveyCTO, but feel free to try these commands on any use case.


== ietoolkit ==
== ietoolkit ==

Revision as of 22:08, 13 April 2020

Researchers use Stata in all stages of an impact evaluation (or study), such as sampling, randomizing, monitoring data quality, cleaning, and analysis. Good Stata coding practices (including packages and commands) are a critical component of high quality reproducible research. These practices also allow the impact evaluation team (or research team) to save time and energy, and focus on other aspects of study design.

Read First

  • DIME Analytics and institutions like Innovations for Poverty Action (IPA) offer a wide range of resources - tutorials, sample codes, and easy-to-install packages and commands.
  • iefieldkit is a Stata package that standardizes best practices (guidelines) for high quality, reproducible primary data collection.
  • ietoolkit is a Stata package that standardizes best practices in data management and data analysis.
  • As with standard Stata packages like coefplot, use ssc install to download these packages.
  • Other common Stata best practices, for instance, with respect to naming file paths, also contribute to successful impact evaluations.

iefieldkit

DIME has developed the iefieldkit package for Stata to simplify the process of primary data collection. The package currently supports supports three major components of this workflow (process) - survey design, survey completion, and data cleaning and data harmonization. iefieldkit uses four commands to simplify each of these tasks:

  • Before data collection. The ietestform command tests the collected data to make sure it follows best practices in naming, coding, and labeling. For instance, it does not let an enumerator move to the next field until they enter a response, thus ensuring that incomplete forms can not be submitted.
  • During data collection. The ieduplicates and iecompdup commands allow the research team to detect (identify) and resolve (deal with) duplicate entries in the data set. These commands were previously a part of the ietoolkit package, but are now part of the iefieldkit package.
  • After data collection. The iecodebook command provides a method for rapidly cleaning, harmonizing, and documenting data sets.

To install the iefieldkit package, type ssc install iefieldkit in your Stata command window. Note that some features of this package might require meta data (information) that is specific to SurveyCTO, but users can still test them in other cases.

ietoolkit

DIME has developed the ietoolkit package for Stata to simplify the process of data management and analysis in impact evaluations. Given below are the list of commands that are currently part of this package.

  • Data management.
    • iefolder sets up a standardized (common) structure for all folders that are shared as part of a project, that is the project folder. It creates master do-files that link to all sub-folders (folders within another folder), so that the project folder is automatically updated every time more data or files are shared from the field teams. This command helps create reproducible research.
    • iegitaddmd allows members of the research team to share a template (outline) folder for a new project on GitHub even if it is empty. This command creates a placeholder that can be updated later when a file is added to that folder. For example, templates often include an output folder where the results of data analysis will be stored. This folder remains empty until the data set is cleaned to prepare it for analysis. Using this command, two people, say A and B, can still share this folder with each other on GitHub.
    • ieboilstart standardizes the version, capacity (in terms of the number of observations it can store in memory), and other Stata settings for all users in a project. This command should be run (typed) at the top of all do-files that are shared between members of the research team. Such a code is called a boilerplate code, since it standardizes the code at the beginning for all do-files.

An example of a code that uses these commands is given below:

ieboilstart, version(14.0) //Standardizes the version for everyone.
global folder "C:/Users/username/DropBox/ProjectABC" 
iefolder new project, projectfolder("$folder") //Sets up the main structure
iegitaddmd, folder ("$folder") //Makes sure users can share the main folder on GitHub even if it is empty
  • Data analysis.
    • iematch is a command which can be used for matching observations in one group to observations in another group which are the closest in terms of a particular characteristic.
      For example, consider a study which is designed to evaluate the impact of randomly providing cash transfers to half the workers in a firm. The research team can use iematch to match and compare wages of women in the treatment group (which received the cash transfers) with observations in a control group (which did not receive the cash transfers).
    • iebaltab runs balance tests, and produces balance tables which show the difference in means for one or more treatment groups. It can be used to check if there are statistically significant differences between the treatment and control groups. If there are significant differences in the means, iebaltab even displays an error message that suggests that results from such data can be wrongly interpreted.
    • iedropone drops only a specific number of observations, and makes sure that no additional observations are dropped.
    • ieboilsave performs checks to ensure that best practices are followed before saving a data set.
    • ieddtab runs difference-in-difference regressions and displays the result in well-formatted tables.
    • iegraph produces graphs of results from regression models that researchers commonly use during impact evaluations.

To install the ietoolkit, type ssc install ietoolkit in your Stata command window.

Other Common Practices

File Paths

DIME Analytics' recommendation is that all file paths should be absolute and dynamic, should always be enclosed in double quotes, and should always use forward slashes for folder hierarchies (/), since Mac and Linux computers cannot read file paths with backslashes. File paths should also always include the file extension (.dta, .do, .csv, etc.), since to omit the extension causes ambiguity if another file with the same name is created (even if there is a default).

  • Absolute file paths means that all file paths must start at the root folder of the computer, for example, C:/ on a PC or /Users/ on a Mac. This makes sure that you always get the correct file in the correct folder. We never use cd. We have seen many cases when using cd where a file has been overwritten in another project folder where cd was currently pointing to. Relative file paths are common in many other programming languages, but there they are relative to the location of the file running the code, and then there is no risk that a file is saved in a completely different folder. Stata does not provide this functionality.
  • Dynamic file paths use globals that are set in a central master do-file to dynamically build your file paths. This has the same function in practice as setting cd, as all new users should only have to change these file path globals in one location. But dynamic absolute file paths are a better practice since if the global names are set uniquely there is no risk that files are saved in the incorrect project folder, and you can create multiple folder globals instead of just one location as with cd.

Examples

  • Dynamic (and absolute) file path - RECOMMENDED
   global myDocs    "C:/Users/username/Documents"
   global myProject "${myDocs}/MyProject"
   use "${myProject}/MyDataset.dta"
  • Relative (and absolute) file path - NOT RECOMMENDED
   cd "C:/Users/username/Documents/MyProject"
   use MyDataset.dta
  • Absolute but not dynamic - NOT RECOMMENDED
    use "C:/Users/username/Documents/MyProject/MyDataset.dta"

Additional Resources

Programs and Commands

General Coding Resources

For more details, see the iefieldkit GitHub page.