Difference between revisions of "Data Cleaning"

Jump to: navigation, search
 
(117 intermediate revisions by 8 users not shown)
Line 1: Line 1:
<span style="font-size:150%">
Data cleaning is an essential step between [[Primary Data Collection | data collection]] and [[Data Analysis | data analysis]]. Raw primary data is always imperfect and needs to be prepared for a high quality '''analysis''' and overall [[Reproducible Research | replicability]]. In extremely rare cases, the only preparation needed is [[Data Documentation | dataset documentation]]. However, in the vast majority of cases, data cleaning requires significant energy and attention, typically on the part of the [[Impact_Evaluation_Team#Research_Assistant|Research Assistant]] (RA). This page outlines the goals of data cleaning, recommends role division, outlines common issues encountered, and presents approaches to resolve them.
</span>
</span>


Data cleaning is an essential step between data collection and data analysis. The aim is to (i) identify data errors, (ii) correct errors, and (iii) improve data collection process.
== Read First ==
 
*The goal of data cleaning is to clean individual data points and to make the [[Master Dataset|dataset]] easily usable and understandable for the [[Impact Evaluation Team|research team]] and external users.
*The quality of the [[Data Analysis|analysis]] will never be better than the quality of data cleaning.
*There is no such thing as an exhaustive list of what to do during data cleaning: each project will have individual cleaning needs. This article provides a very good place to start.
*See this [[Checklist:_Data_Cleaning| data cleaning checklist]] to ensure that common cleaning actions have been completed.


== The Goals of Cleaning ==


The data cleaning process seeks to fulfill two goals:
#To ensure valid [[Data Analysis|analysis]] by cleaning individual data points that bias the analysis
#To make the [[Master Dataset|dataset]] easily usable and understandable for researchers both within and outside of the [[Impact Evaluation Team|research team]]. A really good data cleaning process should also result in [[Data Documentation|documented]] insights about the data and [[Primary Data Collection|data collection]] to inform future '''data collection''' – either for a different round of the same project or for other future projects.


== Read First ==
[[File:Picture2.png|700px|link=|center]]


*See this check list that can be used to make sure that common cleaning actions have been done when applicable.
=== Ensuring Valid Analysis ===


It is really difficult to have a fully efficient data collection procedure in place that would generate error-free raw data. Any output of raw data needs some level of cleaning, either minor or major. Through the cleaning process, the research team can learn lessons and feed such information into next round's data collection, and to make the whole process more efficient.
[[Randomized Control Trials | RCT]] analysis typically rely to regressions to test for statistical differences between the means of the '''control''' and '''treatment groups'''. In essence, one can think of regression analysis as an advanced comparison of means. While this is, of course, an extreme simplification, it may provide a useful framework and perspective to an RA cleaning a [[Master Dataset|dataset]] for the first time. While it may be difficult to have an intuition for the math behind a regression, it easy to have an intuition for the math behind a mean.  


Data cleaning becomes essential because without it any analytical work loses validity. Models used in research work assume data to be clean at the least.
Anything that biases a mean will bias a regression: outliers, missing values, typos, erroneous [[Survey Pilot|survey]] codes, illogical values, [[Duplicates and Survey Logs|duplicates]], etc. While many more things can also bias a regression, this conceptualization provides a good starting place for anyone cleaning a '''dataset''' for the first time. The researcher leading the analysis is trained in the other granular details and knowledge necessary for the specific regression models.


Data cleaning is an important aspect of any impact evaluation project. Almost every research team keep research assistant(s) solely for the purpose of data cleaning, hence the additional costs.
===Making the Dataset Usable and Understandable ===


== The Goal of Cleaning ==
The second goal of the data cleaning is to code and [[Data Documentation|document ]]the [[Master Dataset|dataset]] to make it as self-explanatory as possible. At the time of the [[Primary Data Collection|data collection]] and data cleaning, you know the '''dataset''' much better than you will at any time in the future. Carefully '''documenting''' this knowledge often makes the difference between a good [[Data Analysis|analysis]] and a great one. A usable and understandable '''dataset''' will not only help you and your [[Impact Evaluation Team|research team]] in the future, but also other researchers who use the '''dataset''' down the road.


[[File:Picture2.png| 700px| right]]
== Role Division during Data Cleaning ==
[[Impact_Evaluation_Team#Research_Assistant|Research Assistants]] (RAs) and [[Field_Coordinator|Field Coordinators]] (FCs) should prioritize their time on identifying and [[Data Documentation|documenting]] irregularities in the data rather than correcting them. It is never bad to suggest corrections to irregularities. However, many RAs or '''FCs''' spend too much time trying to fix irregularities and, in turn, do not have enough time to identify and '''document''' them completely. This is often inefficient, as different regression models and/or PI preferences may require different corrections. In such cases, time-consuming corrections may not be valid given the regression model used in the analysis.


There are two main goals when cleaning the data set:
Eventually, the [[Impact_Evaluation_Team#Principal_Investigator|Principal Investigator]] (PI) and the RA or '''FC''' will have a common understanding on what correction decisions to make without involving the PI. Until then, the RA should focus their time on identifying and '''documenting''' as many issues as possible rather than fixing them. Again, it is no problem to do both so long as the time spent fixing doesn't prevent the RA from identifying and '''documenting''' as many issues as possible.


#Cleaning individual data points that invalidate or incorrectly bias the analysis
== Importing Data ==
#Prepare a clean data set so that it is easy to use to other researcher. Both for researchers inside your team and outside your team.


=== Cleaning individual data points ===
The first step in cleaning the data is to import the data. When working with [[Secondary Data Sources|secondary data]], i.e. [[Administrative and Monitoring Data | administrative data]], this step is often straightforward. However, with primary data, this step is often underestimated.


In impact evaluations our analysis often come down to test for statistical differences in the mean between the control group and any of the treatment arms. We do so through advance regression analysis where we include control variables, fixed effects, different error estimators among many other tools, but in essence one can think of it as an advanced comparison of means. While this is far from a complete description of impact evaluation analysis it might give the person cleaning a data set for the first time a framework on what cleaning a data set should achieve.
All modern [[Computer-Assisted Personal Interviews (CAPI) | CAPI]] [[Survey Pilot|survey]] [[Primary Data Collection|data collection]] tools provide methods for importing the raw data in a way that drastically reduces cleaning work. These methods typically include a [[Stata Coding Practices|Stata]] '''do-file''' that generates labels and other features from the [[Questionnaire Programming | questionnaire]] code and then applies them to the raw data during the import.  


It is difficult to have an intuition for the math behind a regression, but it easy to have an intuition for the math behind a mean. Anything that bias a mean will bias a regression, and while there are many more things that can bias a regression, this is a good place to start for anyone cleaning a data set for the first time. The researcher in charge of the analysis is trained in what else that needs to be done for the specific regression models used. The articles linked to below will go through specific examples, but it is probably obvious to most readers that outliers, typos in data, survey codes (often values like -999 or -888) etc. bias means, so it is never wring to start with those examples.
Ensure that any change, no matter how small, is always be made in '''Stata''', [[R Coding Practies|R]], or the scripting language of use. When dealing with incorrect submissions in raw data, for example [[Duplicates and Survey Logs | duplicates]], pilot data mixed with the main data, etc., handle these issues and deletions in such a way that they can be [[Reproducible Research | replicated]] by re-running code: without this information, the [[Data Analysis|analysis]] may no longer be valid. See the article on [[DataWork_Survey_Round#Raw_Folder|raw data folders]] for more details.


=== Prepare a clean data set ===
== Data Issues and Approaches ==


The second goal of the data cleaning is to document that data set so that variables, values and anythings else is as self-explanatory as possible. This will help other researchers that you grant access to this data set, but it will also help you and your research team when access the data set in the future. At the time of the data collection or at the time of the data cleaning, you know the data set much better than you will at any time in the future. Carefully documenting this knowledge so that it can be used at the time of analysis is often the difference between a good analysis and a great analysis.
A countless list of irregularities may appear in a primary [[Master Dataset|dataset]], requiring a multitude of data cleaning actions. This section does not provide an exhaustive list but rather a few examples of irregularities and approaches.


== Role Division during Data Cleaning ==
===ID Variables===
Spend time identifying and documenting irregularities in the data. It is never bad to suggest corrections to irregularities, but a common mistake RAs do is that they spend too much time on trying to fix irregularities on the expense of having enough time to identify and document as many as possible.
Observations in the [[Master Dataset|dataset]] should be [[ID Variable Properties | uniquely and fully identifiable]] by a single '''ID variable'''. Often, raw [[Primary Data Collection|primary data]] includes [[Duplicates and Survey Logs|duplicate entries]]. Carefully [[Data Documentation | document]] these cases. To ensure accuracy, only correct them after discussing with the [[Field Coordinator]] and field team what caused them. <code>[[ieduplicates]]</code>, a command in [[Stata Coding Practices|Stata]], identifies '''duplicated''' entries, while <code>[[iecompdup]]</code> helps to correct them. Once '''duplicates''' are corrected, the observations can be linked to the [[Master DataSet|master dataset]].


Eventually the PI and the RA will have a common understanding on what corrections call the RA can make, but until then, it's recommended that the RA focus her/his time on identifying and documenting as many issues as possible rather than spending a lot of time on how to fix the issues. One major reason is that different regression models might require different ways to correct issues and this is often a perspective only the PI have.
===Illogical Values===
In theory, good [[Questionnaire Programming | questionnaire programming]] should include logic checks that prevent illogical values.
For example, if a respondent is male, then the '''questionnaire''' should not allow the respondent to answer that he is pregnant. However, no '''questionnaire''' can ever be pre-programmed to control for every such case. Discuss with the research best approaches to illogical values found in the raw [[Master Dataset|dataset]].


== Import Data ==
===Typos===
If it is obvious beyond any doubt that the response is incorrect due to a simple typo, then correct the typo. Make sure to [[Data Documentation|document]] the change in a [[Reproducible Research|replicable]] way.


The first step in cleaning the data is to import the data. If you work with secondary data (data prepared by someone else) then this step is often straightforward, but this is a step often underestimated when working with primary data. It is very important that any change, no matter how small, always is done in Stata (or in R or any other scripting language). Even if you know that there are incorrect submission in your raw data (duplicates, pilot data mixed with the main data etc.) those deletions should always be done so that it can be replicated by re-running code. Without this information the analysis might not longer be valid. See the article on [[DataWork_Survey_Round#Raw_Folder|raw data folders]] for more details.
=== Survey Codes and Missing Values ===


=== Importing Primary Survey Data ===
Almost all [[Primary Data Collection|data collection]] done through [[Survey Pilot|surveys]] of any sort allows respondents to answer something like "Do not know" or "Decline to answer" for individual questions. These answers are usually recorded using '''survey''' codes in the format -999, -88 or something similar. If left as such, these numbers will bias means and regressions. Accordingly, they must be replaced with missing values in [[Stata Coding Practices|Stata]].


All modern CAPI survey data collections tools provided methods for importing the raw data in a way that drastically reduces the amount of work that needs to be done when cleaning the data. These methods typically includes a Stata do-file that generates labels and much more from the questionnaire code and then applies that to the raw data as it is being imported. If you are working in SurveyCTO see this article on [[SurveyCTO Stata Template | SurveyCTO's Stata Template]].
'''Stata''' has several missing values. The most well-known is the regular missing value represented by a single "." but '''Stata''' also offers extended missing values: ".a", ".b", ".c" etc. all the way to ".z". '''Stata''' handles these values the same as "." in commands that expect a numeric value. Conveniently, these extended missing values accept value labels that allow you to distinguish between, for example, "Do not know" and "Decline to answer." You might label ".d", for example, as "Decline to answer", and ".k" as "Do not know." Make sure to always assign value labels to extended missing values so that they can be precisely interpreted. Finally, make sure to consistently use the same letter ".a", ".b" etc. to represent only one response across your project. See [http://www.stata.com/manuals13/u12.pdf#u12.2 Stata Manual Missing Values] for more details on missing values.


== Examples of Data Cleaning Actions ==
Missing values can be used for much more than just '''survey''' codes. Any value that we remove because it is incorrect should be replaced with a missing value. In a [[Master DataSet | master dataset]], there should be no regular missing values. All missing values in a '''master dataset''' should contain an explanation of why there is no information for that value.


The material in this section has been generated having primary survey data in mind. Although, a lot of these practices are also applicable when cleaning other types of data sets.
=== Strings ===


=== Data Cleaning Check List ===
All data should be stored in numeric format because
#[[Stata Coding Practices|Stata]] stores numbers more efficiently than strings
#'''Stata''' commands expect values to be stored numerically. During the data cleaning process, make sure to clean categorical string '''variables''' and convert them into numeric codes. Then assign value labels for clarity. The commands <code>destring</code> and/or <code>encode</code> may be useful during this process.


This is a check list that can be used to make sure that all common aspects of data cleaning has been covered. Note that this is not a exhaustive list. Such a list is impossible to create as the individual data sets and the analysis methods used on them all require different cleaning that in the details depends on the context of that data set.  
There are two exceptions in which string '''variables''' are acceptable:
#If the number cannot be stored correctly numerically. This may occur in two scenarios:
##If the number is more than 15 digits long. For obvious reasons, an [[ID Variable Properties | ID]] cannot be rounded and may remain a string. However, if a continuous '''variable''' has more than 15 digits, round it and convert it to a different scale. After all, a precision of 16 digits is not even possible in natural sciences.
##If the number begins with 0, as is sometimes the case for national IDs and telephone numbers. In this case, continue storing the number as a string, as '''Stata''' would remove any leading zeros when destringing.
#Non-categorical text. It is acceptable to store text answers that cannot be converted into categories as strings. A few examples follow:
##Open-ended questions: open-ended questions should, in general, be avoided, but sometimes the [[Questionnaire Programming|questionnaire]] asks the respondent to answer a question in his or her own words.
##Other specifications: the respondent is asked to specify the answer after answering ''other'' in a multiple choice question.
##Proper names: names of people, etc. Note that not all proper names should be stored as string as some can be made into categories. For example, if you [[Primary Data Collection|collect data]] on respondents and multiple respondents live in the same villages, then convert the '''variable''' with the village names into a categorical numeric '''variable''' and assign a value label.


=== Incorrect Data and Other Irregularities ===
== Applying Labels ==
There are several ways to add helpful descriptive text to a [[Master Dataset|dataset]] in [[Stata Coding Practices|Stata]], but the two most common and important ways are '''variable''' labels and value labels.


===Variable Labels===
All variables in a clean [[Master Dataset|dataset]] should have '''variable''' labels that explain what the '''variable''' represents. In addition to a brief explanation of the '''variable''' and perhaps the question number from which it comes, you may also decide to include information such as the unit or currency used in the '''variable'''. The label can be up to 80 characters long.


===Value Labels===


=== Survey Codes and Missing Values ===
Always store categorical '''variables''' numerically and use value labels to indicate what the numeric code represents. For example, yes and no questions should be stored as 0 and 1 with the value labels ''No'' for data cells with 0, and the label ''Yes'' for all data cells with 1. This same concept applies to multiple choice '''variables'''. There are tools in [[Stata Coding Practices|Stata]] that convert categorical string '''variables''' into categorical numeric '''variables''' and automatically apply the string as value labels. The most common tool is <code>encode</code>. However, if you use <code>encode</code>, always use the two options <code>label()</code> and <code>noextend</code>.
=== No Strings ===
*<code>label()</code> forces you to manually create the label before using encode. This requires some manual work but it is worth it.
=== Labels ===
*<code>noextend</code> throws an error if there is a value in the data that does not exist in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a typo.
Without these two options, '''Stata''' assigns a code to each string value in alphabetic order. There is no guarantee that the alphabetic order is changed when observations are added or removed, or if someone else makes changes earlier in the code.


== Additional Resources ==
== Additional Resources ==
* list here other articles related to this topic, with a brief description and link
*DIME Analytics (World Bank), [https://osf.io/ndsk6 Guidelines on Data Cleaning]
* The Stata Cheat Sheets on [http://geocenter.github.io/StataTraining/pdf/StataCheatsheet_processing_15_June_2016_TE-REV.pdf Data processing] and [http://geocenter.github.io/StataTraining/pdf/StataCheatsheet_Transformation15_June_2016_TE-REV.pdf Data Transformation] are helpful reminder of relevant Stata code.
* The [https://github.com/Quartz/bad-data-guide#values-are-missing Quartz guide to bad data] on Github has lots of helpful tips for dealing with the kind of data problems that often come up in real world settings.
*See this [[Checklist:_Data_Cleaning| data cleaning checklist]] to ensure that common cleaning actions have been completed. Note that this is not an exhaustive list. Such a list is impossible to create as the individual datasets and the analysis require different cleaning depending on context.


[[Category: Data Cleaning ]]
[[Category: Data Cleaning ]]

Latest revision as of 18:09, 14 August 2023

Data cleaning is an essential step between data collection and data analysis. Raw primary data is always imperfect and needs to be prepared for a high quality analysis and overall replicability. In extremely rare cases, the only preparation needed is dataset documentation. However, in the vast majority of cases, data cleaning requires significant energy and attention, typically on the part of the Research Assistant (RA). This page outlines the goals of data cleaning, recommends role division, outlines common issues encountered, and presents approaches to resolve them.

Read First

  • The goal of data cleaning is to clean individual data points and to make the dataset easily usable and understandable for the research team and external users.
  • The quality of the analysis will never be better than the quality of data cleaning.
  • There is no such thing as an exhaustive list of what to do during data cleaning: each project will have individual cleaning needs. This article provides a very good place to start.
  • See this data cleaning checklist to ensure that common cleaning actions have been completed.

The Goals of Cleaning

The data cleaning process seeks to fulfill two goals:

  1. To ensure valid analysis by cleaning individual data points that bias the analysis
  2. To make the dataset easily usable and understandable for researchers both within and outside of the research team. A really good data cleaning process should also result in documented insights about the data and data collection to inform future data collection – either for a different round of the same project or for other future projects.
Picture2.png

Ensuring Valid Analysis

RCT analysis typically rely to regressions to test for statistical differences between the means of the control and treatment groups. In essence, one can think of regression analysis as an advanced comparison of means. While this is, of course, an extreme simplification, it may provide a useful framework and perspective to an RA cleaning a dataset for the first time. While it may be difficult to have an intuition for the math behind a regression, it easy to have an intuition for the math behind a mean.

Anything that biases a mean will bias a regression: outliers, missing values, typos, erroneous survey codes, illogical values, duplicates, etc. While many more things can also bias a regression, this conceptualization provides a good starting place for anyone cleaning a dataset for the first time. The researcher leading the analysis is trained in the other granular details and knowledge necessary for the specific regression models.

Making the Dataset Usable and Understandable

The second goal of the data cleaning is to code and document the dataset to make it as self-explanatory as possible. At the time of the data collection and data cleaning, you know the dataset much better than you will at any time in the future. Carefully documenting this knowledge often makes the difference between a good analysis and a great one. A usable and understandable dataset will not only help you and your research team in the future, but also other researchers who use the dataset down the road.

Role Division during Data Cleaning

Research Assistants (RAs) and Field Coordinators (FCs) should prioritize their time on identifying and documenting irregularities in the data rather than correcting them. It is never bad to suggest corrections to irregularities. However, many RAs or FCs spend too much time trying to fix irregularities and, in turn, do not have enough time to identify and document them completely. This is often inefficient, as different regression models and/or PI preferences may require different corrections. In such cases, time-consuming corrections may not be valid given the regression model used in the analysis.

Eventually, the Principal Investigator (PI) and the RA or FC will have a common understanding on what correction decisions to make without involving the PI. Until then, the RA should focus their time on identifying and documenting as many issues as possible rather than fixing them. Again, it is no problem to do both so long as the time spent fixing doesn't prevent the RA from identifying and documenting as many issues as possible.

Importing Data

The first step in cleaning the data is to import the data. When working with secondary data, i.e. administrative data, this step is often straightforward. However, with primary data, this step is often underestimated.

All modern CAPI survey data collection tools provide methods for importing the raw data in a way that drastically reduces cleaning work. These methods typically include a Stata do-file that generates labels and other features from the questionnaire code and then applies them to the raw data during the import.

Ensure that any change, no matter how small, is always be made in Stata, R, or the scripting language of use. When dealing with incorrect submissions in raw data, for example duplicates, pilot data mixed with the main data, etc., handle these issues and deletions in such a way that they can be replicated by re-running code: without this information, the analysis may no longer be valid. See the article on raw data folders for more details.

Data Issues and Approaches

A countless list of irregularities may appear in a primary dataset, requiring a multitude of data cleaning actions. This section does not provide an exhaustive list but rather a few examples of irregularities and approaches.

ID Variables

Observations in the dataset should be uniquely and fully identifiable by a single ID variable. Often, raw primary data includes duplicate entries. Carefully document these cases. To ensure accuracy, only correct them after discussing with the Field Coordinator and field team what caused them. ieduplicates, a command in Stata, identifies duplicated entries, while iecompdup helps to correct them. Once duplicates are corrected, the observations can be linked to the master dataset.

Illogical Values

In theory, good questionnaire programming should include logic checks that prevent illogical values. For example, if a respondent is male, then the questionnaire should not allow the respondent to answer that he is pregnant. However, no questionnaire can ever be pre-programmed to control for every such case. Discuss with the research best approaches to illogical values found in the raw dataset.

Typos

If it is obvious beyond any doubt that the response is incorrect due to a simple typo, then correct the typo. Make sure to document the change in a replicable way.

Survey Codes and Missing Values

Almost all data collection done through surveys of any sort allows respondents to answer something like "Do not know" or "Decline to answer" for individual questions. These answers are usually recorded using survey codes in the format -999, -88 or something similar. If left as such, these numbers will bias means and regressions. Accordingly, they must be replaced with missing values in Stata.

Stata has several missing values. The most well-known is the regular missing value represented by a single "." but Stata also offers extended missing values: ".a", ".b", ".c" etc. all the way to ".z". Stata handles these values the same as "." in commands that expect a numeric value. Conveniently, these extended missing values accept value labels that allow you to distinguish between, for example, "Do not know" and "Decline to answer." You might label ".d", for example, as "Decline to answer", and ".k" as "Do not know." Make sure to always assign value labels to extended missing values so that they can be precisely interpreted. Finally, make sure to consistently use the same letter ".a", ".b" etc. to represent only one response across your project. See Stata Manual Missing Values for more details on missing values.

Missing values can be used for much more than just survey codes. Any value that we remove because it is incorrect should be replaced with a missing value. In a master dataset, there should be no regular missing values. All missing values in a master dataset should contain an explanation of why there is no information for that value.

Strings

All data should be stored in numeric format because

  1. Stata stores numbers more efficiently than strings
  2. Stata commands expect values to be stored numerically. During the data cleaning process, make sure to clean categorical string variables and convert them into numeric codes. Then assign value labels for clarity. The commands destring and/or encode may be useful during this process.

There are two exceptions in which string variables are acceptable:

  1. If the number cannot be stored correctly numerically. This may occur in two scenarios:
    1. If the number is more than 15 digits long. For obvious reasons, an ID cannot be rounded and may remain a string. However, if a continuous variable has more than 15 digits, round it and convert it to a different scale. After all, a precision of 16 digits is not even possible in natural sciences.
    2. If the number begins with 0, as is sometimes the case for national IDs and telephone numbers. In this case, continue storing the number as a string, as Stata would remove any leading zeros when destringing.
  2. Non-categorical text. It is acceptable to store text answers that cannot be converted into categories as strings. A few examples follow:
    1. Open-ended questions: open-ended questions should, in general, be avoided, but sometimes the questionnaire asks the respondent to answer a question in his or her own words.
    2. Other specifications: the respondent is asked to specify the answer after answering other in a multiple choice question.
    3. Proper names: names of people, etc. Note that not all proper names should be stored as string as some can be made into categories. For example, if you collect data on respondents and multiple respondents live in the same villages, then convert the variable with the village names into a categorical numeric variable and assign a value label.

Applying Labels

There are several ways to add helpful descriptive text to a dataset in Stata, but the two most common and important ways are variable labels and value labels.

Variable Labels

All variables in a clean dataset should have variable labels that explain what the variable represents. In addition to a brief explanation of the variable and perhaps the question number from which it comes, you may also decide to include information such as the unit or currency used in the variable. The label can be up to 80 characters long.

Value Labels

Always store categorical variables numerically and use value labels to indicate what the numeric code represents. For example, yes and no questions should be stored as 0 and 1 with the value labels No for data cells with 0, and the label Yes for all data cells with 1. This same concept applies to multiple choice variables. There are tools in Stata that convert categorical string variables into categorical numeric variables and automatically apply the string as value labels. The most common tool is encode. However, if you use encode, always use the two options label() and noextend.

  • label() forces you to manually create the label before using encode. This requires some manual work but it is worth it.
  • noextend throws an error if there is a value in the data that does not exist in the pre-defined label. This way you are notified that you need to add the new value to the value label you created manually. Or you can change the string value if there is a typo.

Without these two options, Stata assigns a code to each string value in alphabetic order. There is no guarantee that the alphabetic order is changed when observations are added or removed, or if someone else makes changes earlier in the code.

Additional Resources

  • DIME Analytics (World Bank), Guidelines on Data Cleaning
  • The Stata Cheat Sheets on Data processing and Data Transformation are helpful reminder of relevant Stata code.
  • The Quartz guide to bad data on Github has lots of helpful tips for dealing with the kind of data problems that often come up in real world settings.
  • See this data cleaning checklist to ensure that common cleaning actions have been completed. Note that this is not an exhaustive list. Such a list is impossible to create as the individual datasets and the analysis require different cleaning depending on context.